Three machines in one Dehumidification dryer22
Purpose of dehumidification dryer:
It is mainly used for engineering plastics with strong hygroscopicity to solve the poor quality problems such as bubbles, silver streaks, cracks, flow marks, poor transparency, etc. caused by poor drying of products; engineering plastics such as PA, PET, PU, ??TPU, PC, PBT, CA, etc. have strong hygroscopicity. Because water penetrates into the plastic particles, traditional dryers cannot completely dry them.
Principle of dehumidification dryer:
It is matched with hot air hopper dryer to perform efficient dehumidification and drying operations.
It effectively reduces the dew point of drying air to below -40℃ and controls the heat at the same time.
Only by blowing it over the surface of wet plastic particles can the moisture content be reduced to below 0.02% before molding.
The honeycomb dehumidifier fully dehumidifies the air in a closed circulation system and quickly precipitates the moisture in the plastic particles to achieve the effect of dehumidification and drying.
A corner of the dehumidification dryer workshop
Dehumidification dryer---multiple models available
The honeycomb rotor with strong dehumidification performance fully absorbs the moisture in the air, forming wind with a very low dew point and strong moisture absorption capacity for dehumidification and drying of raw materials.
Honeycomb rotor design, dew point below -40℃ stable temperature, ensure the quality and stability of molded plastic products.
The entire series adopts P.I.D temperature control system as standard equipment; control with LED LCD display. Automatic control
Three-in-one dehumidifier
Dehumidification + drying + feeding three-in-one series; integrates drying, dehumidification and feeding three functions.
Particularly suitable for places with high degree of automation and compact space. The whole machine adopts PLC control and is easy to operate.
A dew point meter that can monitor the dehumidification effect of the machine at any time is also available for selection. Combined with the requirements of European design, the appearance of the machine is more beautiful, the performance is more stable, and the energy consumption is lower.
Technical parameters
| model | GX-90L/80A | GX-120L/80A | GX-160L/80A | GX-230L/80A | GX-300L/80A | GX-450L/80A | |
| Drying hopper | capacity | 90 | 120 | 160 | 230 | 300 | 450 |
| Thermal insulation materials | Fiberglass insulation material+exterior panel | ||||||
| Average dew point of dry air | -40℃ | ||||||
| drying temperature | 80~160 | ||||||
| Dry air volume | 80 | 80 | 130 | 160 | 220 | 300 | |
| Drying fan | 0.75 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | |
| Regenerative fan | 0.25 | 0.25 | 0.25 | 0.55 | 0.55 | 0.75 | |
| Dry electric heating | 3.9 | 6 | 6 | 7.2 | 12 | 15 | |
| Regenerative electric heating | 3.9 | 3.9 | 3.9 | 5.4 | 5.4 | 7.2 | |
| pipe diameter | dry | 51 | 51 | 51 | 63 | 63 | 76 |
| burial | 3/4″ | ||||||
| regeneration | 38 | 38 | 38 | 51 | 51 | 63 | |
| Feeding fan | 1.1 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | |
| Conveying distance | One feeding | 10 | |||||
| Secondary feeding | 10 | ||||||
| Feed piping | 1.5 | ||||||
| Electric eye hopper | 6 | 6 | 12 | 12 | 12 | 12 | |
| Vacuum hopper | 6 | 6 | 12 | 12 | 12 | 12 | |
| External dimensions | 180×100×87 | 180×100×87 | 180×100×87 | 225×165×125 | 225×165×125 | 290×150×130 | |
| net weight | 310 | 340 | 360 | 420 | 550 | 600 | |