Low speed machine edge crusher
Machine use: Suitable for crushing and recycling defective PC, nylon, ABS and other nozzle materials.
Machine side crusher, used with injection molding machines and other main machines, with recycling system, nozzle materials can be recycled immediately in 20 seconds, and the crushed materials are automatically sent back to the production equipment, no manual work is required, and the recycling is fast and pollution-free.
Machine principle: The nozzle materials to be crushed are crushed by the machine side crusher and fall into the receiving hopper, and then sent to the recycling device by the fan. The recycling device isolates the powder material and recycles it into the dust bag. The granular material is mixed with the new material in the dryer according to the required ratio of new and old materials through the manual ratio valve at the bottom of the recycling device and flows into the main machine for use.
Application scope
It can be used with injection molding machines and other main machines. It can be recycled immediately within 30 seconds without centralized crushing and must be confirmed to be clean.
Product Features
Double-layer soundproof box, ultra-quiet. Let you no longer worry about noise
The barrel is made of stainless steel, which is soundproof and noise-reducing, easy to wash and rust-proof,
so that the raw materials are not polluted
Crushing effect
PC.PP, PVC, POM, ABS, nylon and other hard nozzle defective materials can be easily crushed
Automatic recycling system
20 seconds instant full-automatic recycling
New materials and crushed materials are automatically mixed and recycled in proportion,
No discoloration, no pollution, no waste
Workshop corner
Technical parameters
| Model | AMG-2000 | AMG-3000 | AMG-5000 | AMG-6000 |
| Motor brand | Shengbang/Shiyuan (Taiwan) | Shengbang/Shiyuan (Taiwan) | Shengbang/Shiyuan (Taiwan) | Wan Xin/Shi Yuan (Taiwan) |
| power | 2.2KW | 2.2KW | 3.7KW | 3.7KW |
| electrical equipment | schneider | schneider | schneider | schneider |
| Blade Material | D2 | D2 | D2 | D2 |
| heat treatment | 61 linear measure | 61 linear measure | 61 linear measure | 61 linear measure |
| Fixed knife | 2 grasp | 2 grasp | 4 grasp | 4 grasp |
| Rotation (S-knife) | 8 grasp | 10 grasp | 15 grasp | 15 grasp |
| Spinning (Pineapple Knife) | 24 grasp | 30 grasp | 45 grasp | 45 grasp |
| Spindle speed | 140 RPM | 140 RPM | 140 RPM | 140 RPM |
| Crushed particles | 5mm-8mm | 5mm-8mm | 5mm-8mm | 5mm-8mm |
| Crushing ability | 50-100(kg/h) | 70-150(kg/h) | 100-200(kg/h) | 100-300(kg/h) |
| Input size (length and width) | 280*234mm | 280*290mm | 280*430mm | 370*430mm |
| Body dimensions (length, width, height) | 800*500*1100mm | 800*500*1200mm | 900*500*1260mm | 1450*600*1600mm |
| machine weight | 150kg | 160kg | 200kg | 300kg |