Hydraulic rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
Two limit switches are installed on the frame to control the reversal valve to control the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Rubber cutter owns reasonable structure, convenient automated operation, low noise, and is equipped with safety devices.
Applications and features of hydraulic rubber cutter:
Hydraulic rubber cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastic materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
Two limit switches are installed on the frame to control the reversal valve to control the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Rubber cutter owns reasonable structure, convenient automated operation, low noise, and is equipped with safety devices.
Common styles of hydraulic rubber cutting machines
Specifications
Model | VHC-800 | VHC-1000 | VHC-1200 | VHC-1500 |
Pressure(KN) | 20-80 | 80-160 | 80-200 | 80-200 |
Motor power(HP) | 5 | 15 | 15 | 20 |
Voltage(V) | 380V/415V/220V400V etc. | |||
Cutter width (MM) | 800 | 1000 | 1200 | 1500 |
Piston stroke (MM) | 600-800 | 600-1000 | 600-1000 | 600-1200 |
Oil pressure(MPa) | 10 | 20 | 20 | 25 |
Size(CM) | 110*60*150 | 125*105*230 | 145*120*230 | 175*140*230 |
Weight(KG) | 800 | 1200 | 1500 | 1800 |